You have made a wise choice with Ua Floors® engineered hardwood flooring.
Ua Floors®' precision milling and gorgeous, ultra-durable Aluminum Oxide UV-hardened polyurethane finish combined with regular maintenance will preserve the beauty of your Ua Floors' floor for many years to come!

The finishing technology used by Ua Floors® is the best choice for easy maintenance.
To preserve all the beauty of your floor, simply follow a few very simple maintenance suggestions!

Ua Floors® flooring can be cleaned in three quick and easy steps:

STEP 1:

Sweep or vacuum floor to remove any dust or abrasive material.
Do not use beater bar.

STEP 2:

Spray a light coat of cleaner directly over solid area or terry cloth mop cover.

STEP 3:

Mop floor with a back-and-forth motion in same direction as strips, cleaning only a small area at a time. Finish one section before starting another.

NOTES! :
• Never pour cleaner or any other liquid directly onto the floor surface. This will prevent liquid penetrating between boards
   into the tongue and groove area and causing damage to wood fibers.

• If there is any doubt about a certain cleaner try it on a window and if it leaves streaks or a film then it will do the same on your floor.

• If the mop cover is dirty it can cause streaking on the floor-replace it  with a clean one. You can hand wash or machine
   wash terry cloth mop covers like any other terry cloth towel. Please avoid using fabric softener during wash and/or dry
   cycle.

•Some wood species, such as Brazilian Cherry / Jatoba, Brazilian Walnut / Ipe, Australian Cypress etc., because of its
  nature characteristics, may easily crack or deform if the enviornmental conditions are not properly maintained!
  In order to ensure the best performance of Ua Floors' flooring, the heating and ventilation systems should be designed
  to keep & maintain the relative humidity level between 35% to 55%RH and temperature between 60 to 80 degrees
  Fahrenheit.